| November 9, 2007 |
| Main Spars |
 |
 |
| Still had to finish up countersinking a few areas. On the Spar Cap we were not able to use the drill press, so we free-handed it. |
 |
| Had to use an extension for the countersink in this area. We did not have to countersink this entire piece (Thank Goodness!). |
 |
| There were 4 or 5 areas that required a screw to be countersunk. We finished them up last. Here is the screw test-fitted in the hole... Your probably thinking, "That hole is too big for the screw!" Well, not really. There is a .032" Top Web that will be dimpled into all these holes. Hopefully all will be flush in the end!! |
 |
| Being such a "busy" part on the plans, I THINK I am ready to prepare the Webs for priming. Using a maroon Scotchbrite pad and Lacquer Thinner to get all the smudges off. |
 |
| Priming... |
 |
| Light coat of primer on all the Webs. Next, it will be time to assemble this thing for RIVETING!!! |